The infra-red transmitter is also the battery charger for the helicopter. It required 6 x AA Batteries (not included).Able to charge with USB wire!Don’t want to drain the battery pack in your transmitter? Simple, you can charge your Helicopter thru computer USB socket! Feature: Material: ABS, Alloy ? LED Strobe to flash for night flight ? Suitable for indoor flight only ? Dual propeller system ? Full function 3 channel radio control ? Flight stabilizing system ? Super lightweight airframe ? Brake for easy landing ? Memory function ? battery type: 3.7v 150mah Lithium-Polymer (Li-Poly) Battery ? charging time: 20-30 minutes (from Controller) and 15 minutes (from USB charging) ? run time per charge: 7-10 minutes ? control distance: 10-15 m Specification: Length: 182mm (7.1 inch) Battery: 3.7V 150mah Li-Polymer battery Flight Time: 7-10 minutes Package Include: – Helicopter- Remote Controller- USB Wire- Main Blades (2 pcs)- User Manual
SpecificationDimension: Φ28 X 37.5mm Speed constant (KV): 3100RPM/V Working voltage: 6-18V Shaft extension: 13.5mm Shaft diameter: Φ3.17mm Weight: 96gFeaturesHigh performance brushless motor (it needs match the timing of brushless motor ) Useing import Selenium(Se) steel , high flux and magnetism make efficiency It can save a lot of electric-power with the front and backball bearing; It is the ideal parts of electro motion aeroplane and helicopter’s.
This is the latest version 2 of the Falcon 3D helicopter equipped with the latest radio control set with LCD display, cable for simulator, new gyro, and a strengthened tail pipe. This helicopter is made of special material, and has the ability of anti-bearing and crash resistant which lowers the maintenace cost. Furthermore, this kit includes a flight simulator kit (USB cable + software), training video CD, and a crash training kit. 25-1/4" main rotor diameter, 23-3/4" overall length, 20 oz. flying weight. Falcon 3D comes completely assembled and ready to fly. Helicopter has plenty of power and head speed for sport flying and aerobatics. Includes a brushless motor, brushless controller, gyro, 1300 mAh Lipo battery, wood blades, aluminum tail boom, training landing gear, and 6-channel 72 mHz FM helicopter transmitter. Charge the 1300 mAh lipo battery with the included cell balancing Lithium charger, from a 12 volt DC battery. Gear driven tail has all conical gears for smooth, reliable operation. Transmitter has pitch range centering and pitch curve end point adjustment knobs, and an Idle-up switch for aerobatic and inverted flight modes. Also includes training gear with Ping Pong balls and a blade holder. Transport in its original box. For one price, you get everything you need to get started in aerobatic helicopters. The Falcon 3D V2 is capable of all the basic 3D helicopter maneuvers such as loops, rolls, stall turns, and inverted flight! Brushless motor with heat sink Heading-hold gyro Tail drive with conical gears Rotor head Nylon main and autorotation gears Main frame and landing gear Feature: 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New 6 channel Transmitter with LCD display and PIT/PLT mode lock switch and adjustable knob NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights Plenty of power and head speed for sport flying and aerobatics High quality individual head lock gyro Reliable gear system Reliable gear system Accurate tail pitch control system Tail servo mount for accurate rudder control Reinforced carbon fiber tail rod High intensity stainless steel shaft High quality carbon fiber main blades 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there ar
This 64mm F16 is a high quality EPS foam model of the famous FIGHTING FALCON, an extremely popular fighter jet to model, and FMS has done extremely well in creating a superb flying model of the F16. With an excellent paint finish, extremely smooth and well filled you can hardly tell this beauty is foam! The F16 goes together in a few snaps. Tthe fuselage is pre-assembled, pre-installed with all the newest electronics and painted in a U.S. Airforce version! Very minimal building required to get the F16 in the air. The F16 is designed to be taken off on hand launched, and is a really fine-flying aircraft. VERY scale, sexy, sleek and FAST! You need to keep good eyes when flying this baby. Great vertical performance. Comes 100% Ready-to-Fly with all electronics pre-installed. Included 4-Channel Full-Function Transmitter. Bottomline, the F16 is one of the best ducted fan jet in the market! Feature: Futaba-Stanard 4 Channel Full Function Radio Controller (Aileron, Elevator, Throttle) Full aerobatic characteristics of a real airplane w/ Digital Proportional Motor Speed Control Excellent flying performance and very stable, very fast at over 70mph! Fuselage-preinstalled w/ the high quality Outrunner Brushless Ducted Fan, 25amp Speed Control, and 1300mah 20C 11.1 Volt Li-Po Battery Pack Super tough, lightweight foam plane w/ shock resistance airframe and strong durable wings! Perfect scale appearance w/ detailed body structure Excellent Flight Performance Great plane for intermediate pilot who’s ready for the next level in radio control plane Excellent inverted flight control and high roll rate Approximately 10 minutes flight time on each charge All spare parts and accessories are available (Visit our Support Forum for Technical Help) 100% Ready to Fly in Just Minutes! Complete Kit, Easy to Assemble (Everything is included and 90% assembled — only required 8 AA batteries for the transmitter) Specification: Wingspan: 540mm (21.3 in) Length: 830mm (32.7 in) Flying Weight: 500g (17.6 oz) Drive System: 64mm Ducted Fan (Powerful Outrunner Brushless Motor) Servo: 4X 9g high speed micro servos Speed Controller: 25 Amp Brushless Speed Control Battery: 11.1V 1300mah 20CLi-Polymer Package Include: Airplane (90% assembled) 4 Channel Multifu
This is the RC Bird of Jove Ready To Fly Electric Helicopter (Free Shipping). This is battery operated and radio controlled. Includes RC Helicopter, charger, and RC controller. The helicopter has an internal battery that you connect to the charger. The RC controller requires 8 AA batteries (not included). Recommended for ages 10 and up.
This is the most advanced wireless spy cam in the market today. Mount this camera on a rc car, rc plane or rc helicopter and you will get live FPV action! Also easy to spy on your target. Easy to hide for surveillance purposes. >5.8G wireless video and audio transmission >380 TVL of horizontal definition. >Micro-camera easy for installation. >Receiver with 2 channels exchangeble. >100m transmission distance without block. > Audio monitoring with microphone in camera. Item Value Transmission Frequency CH1 5.805GHz~CH2 5.845GHz Modulation Mode FM Unobstructed Effective Range 100m(Without Block) Operating Temperature 0℃~ +50℃ / +32℉~ +122℉ Storage Temperature -20℃ ~ +60℃ / -4℉ ~ +140℉ Operating Humidity 85%RH CAMERA TV System PAL NTSC Validity Pixel 628(H) x 582(V) 510(H) x 492(V) Image Device 1/3" OmnVision CMOS Horizontal Definition 380TV Line Angular Field of View 45° (f=6mm) Minimum Illumination 3.0Lux(F1.2) Scanning Frequency(H) 15.625KHz 15.734KHz Scanning Frequency(V) 50Hz 60Hz Power Adapter DC 8V/500mA Dimension 35x25x53mm Weight 45g RECEIV
Soar high into the skies with the Stunt King 3 channel RTF (ready to fly) remote control airplane. This beautiful RC plane uses aileron and elevator controls. just like a full size airplane that enable the precise handling needed to execute a variety of stunts – including rolls, stalls, and inverted flight. A strong 370 electric engine drives the rear propeller which powers the plane to 22 mph (depending on wind speed) for up to 15 minutes on a single charge. The plane’s carbon fiber-reinforced symmetrical airfoils are constructed of durable EPP foam which provide maximum surface area, resulting in easy maneuvering. Designed for launch by hand, this RC plane requires minimal assembly and is well-suited for beginning RC enthusiasts as well as advanced stunt operators. Features: 3 Channel Control Dual Mini Servos Up, Down, Left, Right, Forward, Rotate Crash-Resistant EPP Foam Includes: Stunt King 9.6v Battery and Charger Battery Requirements: 8 AA Batteries (Not Included!) Specifications: Wingspan: 935mm Length: 530mm Flight Time:10-15 min Flight Speed: up to 22 MPH (Click one of the links below to see related RC products): Model: RC Airplanes Type: Electric RC Airplanes
MX102 Matrix Aero Body (Clear) RC cars are a fantastic hobby, but everyone crashes now and then. Don’t feel bad as once you get the hang of driving an RC car your life will never be the same. Your RC world will be filled with the joys of driving RC cars on the track, block, backyard, or parking lot. Make sure to check out our wide assortment of nitro RC cars featured at our toy stores that make for high speed fun. We carry all Cen parts too. Spare parts for remote control cars are inexpensive, but driving an RC car with a miniature camera is priceless. Our mini camera is extremely light in weight and size so there is no need to worry about extra pounds. All of our remote control cars are more than powerful enough to lift the mini cameras we offer as it only weighs a few grams.
Associated TC4 RTR R/C 4WD Electric Touring Car Team Associated?s revolutionary TC3 set the benchmark for touring car performance and quickly became the choice of winning racers all over the world. The TC3′s race-proven shaft-drive design captured many national and international championships in the past few years, and has spawned numerous imitations. Now the Team is proud to introduce the next generation RC10TC4 Touring Car? the refinement of the proven TC3 racing platform, optimized with more precise tuning features, better balance, and greater durability. The TC4′s chassis has been designed with the batteries moved closer to the centerline of the car? a favorite TC3 modification of many Factory Team drivers. This "mass centralization" allows quicker directional transitions, and the narrower chassis provides more side-to-side roll clearance. The inline motor mounting system features an all-new machined aluminum motor mount which not only provides greater motor stability, but also functions as an integral heat sink to draw heat away from today?s hotter modified motors. An optional "Factory Team" TC4 chassis forced air duct system provides even greater airflow to the motor. Of course, the TC4 is supported by a full line of Factory Team performance parts, including blue titanium turnbuckles, optional radial heatsinks, a forced air-duct system, and the entire range of graphite chassis components. Team Associated?s RC10TC4 Touring Car is the refinement of the revolutionary TC3 platform, optimized with more precise tuning features, better balance, and greater durability. Team Associated takes full advantage of all these improvements and combines them to bring you the RC10TC4 RTR. The TC4 RTR features include a Reedy Radon 17-turn motor, LRP’s latest A.i. automatic speed control and Team Associated’s XP radio system, all factory assembled. The TC4 RTR also comes with treaded tires mounted on chrome 8-spoke wheels, composite CVDs, ball diffs, VCS oil-filled composite shocks and a cool street-tuner decal sheet. All that’s left for you to do is to add your batteries and get ready to lay down the rubber. Features Double-decked impact-resistant plastic and lightweight foam bumper system. Shock towers with four upper shock mounting hole options. 6061 T6 blue anodized aluminum drive shaft fits in strong composite drive cups. Machined aluminum motor mount for greater motor stability and functions as an integral heat sink to draw heat away from today’s hotter modified motors. Floating hinge pin system allowed us to develop an anti-dive, anti-squat suspension adjustment shim system front and rear. Optimized steering system features a dual-bellcrank/ rack configuration. Front and rear suspension links feature vertical ballstud a
These are MicroSizers, the Palm sized, Complete R/C cars with Real Racing Action High Speed, Race-anywhere size! Charge your car for 45 seconds by attaching it to the INCLUDED remote control (picture of controller on left side)….you’re ready to go! You can race ANYWHERE, even on tables and floors. Ofcourse, kids love them, but corporate executives will also have a great time racing MicroSizers in the office! MicroSizers are the perfect gift for car and truck lovers of all ages. FEATURES: Pivot point suspension, gives you better traction and steering control. Flat Panel Master board, which is the Electronic “brain” with advanced Micro Circuitry. MicroPress Fit gears, for superior axle-spinning strength. Micro-set Adjustable Trim, for fine-tuned steering action. Charging points: Car connects directly to the transmitters built-in charger. Pre-painted body. Micro-Snap Motor, mini sized, but Mighty Powerful! NiCd battery, charges in 45 seconds. 2-channel 49mHz radio with wind up, retractable antenna and charger for the car, built into the side under a flip up door. INCLUDES: One Fully Customizable Remote Control MicroSizer, NiCd battery, 2-channel radio, and instructions. REQUIRES: 2 “AA” alkaline batteries for radio SPECS: CAR Length: approx 2-1/2″ (63mm) Width: approx 1-1/4″ (32mm) Height: approx .9″ (23mm) RADIO Length: 3.8″ (96.5mm) Width: 1″ (25mm) Height: 2.7″ (68.5mm)
