Raptor 90 3D Kit
| () |
|---|
We found a great deal on the Raptor 90 3D Kit for only $579.95 at NitroRCX.
Raptor 90 3D Item No. 4892 Specification Full Length of Fuselage(mm / in.) 55 1/2" (1410mm) Full Width of Fuselage(mm / in.) 7 1/2" (190mm) Total Height(mm / in.) 18 1/3" (476mm) Main Rotor Dia(mm / in.) 63 1/4" (1605mm) Tail Rotor Dia(mm / in.) 10 1/4" (260mm) Gear Ratio 8.27:1:4.65 Full Equipped Weight(g/ lbs.) 10.58 lbs (4800g) Introduction Top Performer The Raptor 90 3D was specifically-created for the 3D fanatics with the fantastic Raptor 90 SE as a proven foundation. To save weight, we stripped the machine of all "bling-bling" and then injected the must-have upgrades and options to deliver an extreme 3D helicopter. The aluminum motor hub, the over-sized paddles and a thick airfoil deliver lightening-fast cyclic-response and rock-solid hover. In addition, three different Bell-Hiller mixing ratios offer nimble, very nimble, and extremely nimble control responses… If all-out 3D is your thing, then look no more. Features 1. Machined metal main rotor hub 2. New nonlinear stiffness flapping damper 3. Machined metal bearing blocks for main rotor shaft 4. Aluminum seesaw that permits different flybar ratio 5. Bell-Hiller mixing arms with holes for different control sensitivities 6. 3D paddles of 30g and carbon 3D vertical fin 7. Push-pull system for collective and cyclic pitch control 8. Light weight tail boom bracket 9. 8.27 to 1 gear ratio for 3D flying 30g light weight paddle & SUS flybar rod Metal bearings blocker for main rotor shaft New decal Light tail boom bracket Metal Hub & swashplate SUS push-pull levers
